English

Isikhokelo esiSebenzayo kwiZiboniso ze-LED zangaphakathi kuShishino kunye neMisitho

Umboniso ohonjisiweyo wangaphakathi_1

Iziboniso ze-LED zangaphakathi zilukhetho oludumileyo lwentengiso kunye nokuzonwabisa. Nangona kunjalo, abantu abaninzi abaqinisekanga ukuba ungakhetha njani isikrini esikumgangatho ophezulu ngexabiso elifanelekileyo.
Kwesi sikhokelo, siza kukuhamba ngeengqwalasela eziphambili ngaphambi kokutyala imali kwisiboniso se-LED sangaphakathi, kubandakanya inkcazo esisiseko, iindlela zophuhliso, kunye namaxabiso.

1. Yintoni uMboniso we-LED waNgaphakathi?

Njengoko igama libonisa, iUmboniso we-LED wangaphakathiibhekisa kwizikrini ze-LED eziphakathi ukuya kwezinkulu ezilungiselelwe ukusetyenziswa ngaphakathi.Le miboniso idla ngokubonwa kwiivenkile ezinkulu, kwiindawo zokuthenga, iibhanki, iiofisi, nokunye.

Ngokungafaniyo nezinye iziboniso zedijithali, ezifana nezikrini ze-LCD, iziboniso ze-LED azifuni ukukhanyisa kwakhona, okuphucula ukukhanya, ukusebenza kakuhle kwamandla, ii-angles zokujonga, kunye nokuchasana.

Umahluko phakathi kweZiboniso ze-LED zangaphakathi nangaphandle

Nantsi umahluko omkhulu phakathi kweziboniso ze-LED zangaphakathi nangaphandle:

  1. Ukuqaqamba
    Izikrini zangaphakathi zihlala zifuna ukukhanya okuphantsi ngenxa yokulawula ukukhanya okujikeleze.
    Ngokwesiqhelo, imiboniso yangaphakathi inokukhanya okujikeleze i-800 nits, ngelixa izikrini zangaphandle zifuna ubuncinci ii-5500 ze-nits ukubonisa umxholo ngokucacileyo.

  2. I-Pixel Pitch
    I-pixel pitch inxulumene ngokusondeleyo nomgama wokujonga.
    Iziboniso ze-LED zangaphakathi zijongwa kumgama osondeleyo, zifuna isisombululo esiphezulu se-pixel ukunqanda ukuphazamiseka komfanekiso.
    Izikrini ze-LED zangaphandle, ezifana neziboniso ze-P10, zixhaphake kakhulu. Iibhilibhodi ezinkulu zangaphandle zihlala zifuna izisombululo eziphezulu.

  3. Inqanaba loKhuseleko
    Iziboniso ze-LED zangaphakathi zifuna ngokubanzi i-IP43, ngelixa iziboniso zangaphandle zifuna ubuncinane i-IP65 ngenxa yeemeko zemozulu ezahlukeneyo. Oku kuqinisekisa ukuxhathisa okwaneleyo kwamanzi kunye nothuli ngokuchasene nemvula, amaqondo obushushu aphezulu, ukukhanya kwelanga kunye nothuli.

  4. Iindleko
    Ixabiso lemiboniso ye-LED ixhomekeke kwizinto, ubungakanani kunye nesisombululo.
    Isisombululo esiphezulu sithetha iimodyuli ezininzi ze-LED kwiphaneli nganye, eyandisa iindleko. Ngokufanayo, izikrini ezinkulu zibiza kakhulu.

2. Ixabiso lokuBonisa i-LED yangaphakathi

2.1 Imiba emihlanu echaphazela amaxabiso e-LED yangaphakathi

  1. IC – Umlawuli IC
    Ii-ICs ezahlukeneyo zisetyenziswa kwiziboniso ze-LED, kunye nee-ICs zomqhubi ezibalelwa malunga ne-90%.
    Babonelela ngembuyekezo yangoku kwii-LEDs kwaye bachaphazela ngokuthe ngqo ukufana kombala, i-grayscale, kunye nezinga lokuhlaziya.

  2. Iimodyuli ze-LED
    Njengeyona nto ibaluleke kakhulu, amaxabiso emodyuli ye-LED axhomekeke kwipixel pitch, ubungakanani be-LED, kunye nophawu.
    Iimpawu ezidumileyo ziquka iKinglight, NationStar, Sanan, Nichia, Epson, Cree, kunye nokunye.
    Ii-LED ezinexabiso eliphezulu ngokubanzi zibonelela ngokusebenza okuzinzile, ngelixa iimveliso ezinexabiso eliphantsi zixhomekeke kumaxabiso akhuphisanayo ukuze zifumane isabelo semarike.

  3. Ubonelelo lwaMandla oMbane
    Iiadaptha zamandla zibonelela ngoku ezifunekayo ukuze izikrini ze-LED zisebenze.
    Imigangatho yombane yamazwe ngamazwe yi-110V okanye i-220V, ngelixa iimodyuli ze-LED zisebenza ngokuqhelekileyo kwi-5V. Amandla ombane aguqula amandla ombane ngokufanelekileyo.
    Ngokuqhelekileyo, izixhobo zombane ezi-3-4 ziyafuneka kwi-square meter nganye. Ukusetyenziswa kwamandla aphezulu kufuna izinto ezininzi, ukwandisa iindleko.

  4. IKhabhinethi yokuBonisa i-LED
    Izinto zeKhabhinethi zilichaphazela kakhulu ixabiso.
    Umahluko kwi-material density matter—umzekelo, intsimbi yi-7.8 g/cm³, i-aluminiyam yi-2.7 g/cm³, i-magnesium alloy 1.8 g/cm³, kunye ne-die-cast aluminium 2.7–2.84 g/cm³.

 

2.2 Ubalwa njani amaxabiso omboniso we-LED waNgaphakathi

Ukuqikelela iindleko, qwalasela ezi zinto zintlanu:

  1. Ubungakanani beSkrini– Yazi imilinganiselo ngqo.

  2. Indawo yoFakelo-Imisela iinkcukacha, umzekelo, ufakelo lwangaphandle lufuna ukhuseleko lwe-IP65.

  3. Ukujonga umgama-Iphembelela i-pixel pitch; imigama ekufutshane ifuna isisombululo esiphezulu.

  4. Inkqubo yokulawula- Khetha amacandelo afanelekileyo, njengokuthumela/ukufumana amakhadi okanye iiprosesa zevidiyo.

  5. Ukupakishwa- Izinketho ziquka amakhadibhodi (iimodyuli / izixhobo), i-plywood (iindawo ezisisigxina), okanye ukupakishwa kwempahla yomoya (ukusetyenziswa kwerenti).

umboniso okhokelela ngaphakathi

3. Izinto eziluncedo kunye nezingeloncedo kwiZiboniso ze-LED zangaphakathi

3.1 Izinto eziluncedo ezintandathu kwiZiboniso ze-LED zangaphakathi

  1. Ukulungiswa koBukhazikhazi obuPhezulu
    Ngokungafaniyo neeprojektha okanye iiTV,Iziboniso ze-LEDinokufikelela kukukhanya okuphezulu ngexesha lokwenyani, ifikelele kwi-10,000 nits.

  2. I-engile yokuJonga eBanzi
    Iziboniso ze-LED zinika ii-angles zokujonga amaxesha angama-4-5 ububanzi ngaphezu kweeprojekti (140 ° -160 ° eqhelekileyo), ukuvumela phantse nawuphi na umbukeli ukuba abone umxholo ngokucacileyo.

  3. Ukusebenza koMfanekiso oPhezulu
    Iziboniso ze-LED ziguqula umbane ekukhanyeni ngokufanelekileyo, ukubonelela ngeereyithi eziphezulu zokuhlaziya, ukunciphisa i-latency, i-ghosting encinci, kunye nokuchasana okuphezulu xa kuthelekiswa ne-LCDs.

  4. Ubomi Obude
    Iziboniso ze-LED zingafikelela kwiiyure ze-50,000 (malunga ne-15 iminyaka kwiiyure ze-10 / ngosuku), ngelixa i-LCDs ihlala malunga neeyure ze-30,000 (iminyaka eyi-8 kwiiyure ze-10 / ngosuku).

  5. Ubungakanani obunokwenziwa ngokwezifiso kunye neeMilo
    Iimodyuli ze-LED zinokudityaniswa kwiindonga zevidiyo zemilo eyahlukeneyo, njengokuma komgangatho, isetyhula, okanye i-cubic displays.

  6. I-Eco-Friendly
    Uyilo olulula lunciphisa ukusetyenziswa kwamafutha okuthutha; ukwenziwa kwemekyuri ngaphandle kwemekyuri kunye nobomi obude obusezantsi bokusetyenziswa kwamandla kunye nenkcitho.

3.2 Izinto ezingeloncedo kwiZibonisi ze-LED zangaphakathi

  1. Iindleko eziphezulu zokuqala- Nangona iindleko zangaphambili zinokuba phezulu, ixesha elide kunye nokugcinwa okuphantsi kunika ukugcinwa kwexesha elide.

  2. Ungcoliseko loKhanya olunokubakho-Ukukhanya okuphezulu kunokubangela ilitha, kodwa izisombululo ezinjengezinzwa zokukhanya okanye ukulungiswa kokukhanya okuzenzekelayo kuyayinciphisa le nto.

4. Iimpawu zeZiboniso ze-LED zangaphakathi

  1. Isikrini esineSigqibo esiPhezulu-I-pixel pitch incinci kwimifanekiso ebukhali, egudileyo, ukusuka kwi-P1.953mm ukuya kwi-P10mm.

  2. Ukufakela okuguquguqukayo-Inokufakwa kwiifestile, iivenkile, iivenkile ezinkulu, iilobhi, iiofisi, amagumbi ehotele kunye neeresityu.

  3. Iisayizi zesiko-Iimilo ezahlukeneyo kunye nobukhulu obukhoyo.

  4. Ufakelo olulula kunye noLondolozo-Uyilo olusebenziseka lula luvumela ukudibanisa / ukuchithwa ngokukhawuleza.

  5. Umgangatho ophezulu womfanekiso- Umahluko ophezulu, i-14-16-bit grayscale, kunye nokukhanya okulungelelanisiweyo.

  6. Isebenza kakuhle emalini-Amaxabiso afikelelekayo, iwaranti yeminyaka emi-3, kunye nenkonzo ethembekileyo emva kokuthengisa.

  7. Uyilo lwezicelo-Ixhasa ekuhleni, esebenzayo, kwaye ebhetyebhetye izikrini ze-LED zokuseta izinto ezintsha.

5. Iindlela zoPhuhliso lweZiboniso ze-LED zangaphakathi

  1. Iziboniso ze-LED ezidibeneyo-Dibanisa unxibelelwano lwevidiyo, umboniso, ibhodi emhlophe edibeneyo, uqikelelo olungenazingcingo, kunye nolawulo olulumkileyo lube lunye. Ii-LED ezicacileyo zibonelela ngamava omsebenzisi aphezulu.

  2. Iindonga ze-LED ezibonakalayo-Izikrini ze-LED zangaphakathi zihlangabezana neemfuno eziphezulu ze-pixel pitch ye-XR kunye nemveliso ebonakalayo, eyenza intsebenziswano kunye neendawo zedijithali ngexesha langempela.

  3. Iziboniso ze-LED ezigobileyo-Ifanelekile kufakelo loyilo, amabala emidlalo, kunye nodederhu lweevenkile, ezibonelela ngemigangatho egobileyo engenamthungo.

  4. Iziboniso ze-LED zenqanaba-Izikrini zokurenta okanye ezingasemva zibonelela ngokungenamthungo, imiboniso emikhulu eyogqitha izakhono zeLCD.

  5. Iziboniso ze-LED ezineSigqibo esiPhezulu-Nikeza amaxabiso aphezulu okuhlaziya, i-grayscale ebanzi, ukukhanya okuphezulu, akukho ghost, ukusetyenziswa kwamandla aphantsi, kunye nokuphazamiseka okuncinci kwe-electromagnetic.

Ii-Electronics ezishushuuzimisele ukuhambisa imiboniso ye-LED ekumgangatho ophezulu enemifanekiso ecacileyo kunye nevidiyo egudileyo kubathengi behlabathi.

6. Isiphelo

Siyathemba ukuba esi sikhokelo sibonelela ngeembono ezisebenzayoIsikrini se-LED sangaphakathi .
Ukuqonda usetyenziso lwabo, iimpawu, amaxabiso, kunye nokuqwalaselwa okuqhelekileyo kuya kukunceda ufumane umboniso okumgangatho ophezulu ngexabiso elifanelekileyo.

Ukuba ujonge ulwazi oluthe kratya lokubonisa i-LED okanye ufuna isicatshulwa esikhuphisanayo, zive ukhululekile ukufikelela kuthi nangaliphi na ixesha!

Ixesha lokuposa: Nov-10-2025